DKC Series
The DKC Series is a range of drives by Bosch Rexroth Indramat known for their reliability and cost-effective solution for single and multiple axis automation control. They offer ability to store up to 32 positions, easy installation, longevity, and come in various orientations based on manufacturing or automation environment demand.
| Part # | Description | Stock Level |
| DKC01.1-030-3-FW | The DKC01.1-030-3-FW is an AC servo amplifier drive controller in the DKC Series. It utilizes a dual position seven-segment display for clear and precise feedback. | Available, Call For Quote |
| DKC01.1-040-7-FW | The DKC01.1-040-7-FW is an AC Servo Amplifier in the DKC Series. It operates on a power connection rating of 700VDC and current type of 40 amps. | Available, Call For Quote |
| DKC01.3-004-3-MGP-01VRS | The DKC01.3-004-3-MGP-01VRS is a Servo Drive Controller in the DKC Series. It operates with a power connection voltage rating of 300 VDC. | Available, Call For Quote |
| DKC01.3-008-3-MGP-01VRS | The DKC01.3-008-3-MGP-01VRS is an EcoDrive Cs Drive in the DKC Series. It supports a power range from 100 to 750 W. | Available, Call For Quote |
| DKC01.3-012-3-MGP-01VRS | The DKC01.3-012-3-MGP-01VRS is a Drive Controller in the DKC Series. It operates at a current of 12 A and an installation elevation of 1000 meters above sea level. | Available, Call For Quote |
| DKC01.3-016-7-FW | The DKC01.3-016-7-FW is a Drive Controller in the DKC Series. It has a protection level of IP 20 and a rated intermediate circuit voltage of 700 V. | Available, Call For Quote |
| DKC01.3-018-3-MGP-01VRS | The DKC01.3-018-3-MGP-01VRS is a Servo Drive Controller in the DKC Series. It operates with a nominal voltage DC bus power connection of 300 volts. | Available, Call For Quote |
| DKC01.3-040-7-FW | The DKC01.3-040-7-FW is an AC Servo Amplifier in the DKC Series. It operates with a current rating of 40 amps and a voltage rating of 700 volts DC. | Available, Call For Quote |
| DKC01.3-100-7-FW | The DKC01.3-100-7-FW is a Servo Amplifier Drive Controller in the DKC Series. It has a current rating of 100 A and operates at a voltage of 700 VDC. | Available, Call For Quote |
| DKC01.3-200-7-FW | The DKC01.3-200-7-FW is an ECODRIVE Drive Controller in the DKC Series. It operates at a maximum installation height of 1000 meters above sea level. | Available, Call For Quote |
| DKC01.3-640-7-FW | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller in the DKC Series. This Drive features a Rated Current of 640A along with a DC Bus Nominal Voltage of DC 700V. | Available, Call For Quote |
| DKC01.3-LK-EAK02 | The DKC01.3-LK-EAK02 is a Drive Controller in the DKC Series. It is designed with optimal use for machine tools, assembly lines, and packaging, providing flexibility while controlling various motor categories. | Available, Call For Quote |
| DKC02.1-040-7-FW | The DKC02.1-040-7-FW is a Drive Controller in the DKC Series. It operates with a rated current of 40A and an input voltage of 380V-480V. | Available, Call For Quote |
| DKC02.3-004-3-MGP-01VRS | The DKC02.3-004-3-MGP-01VRS is an EcoDrive in the DKC Series. It weighs 1.8kg and its specific dimensions are 182mm tall, 55mm wide, and 170mm deep. | Available, Call For Quote |
| DKC02.3-008-3-MGP-01VRS | The DKC02.3-008-3-MGP-01VRS is a Drive Controller in the DKC Series. It operates with a rated input voltage of 200 to 230 VAC. | Available, Call For Quote |
| DKC02.3-012-3-MGP-01VRS | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller in the DKC Series. This Drive features a Rated Current of 12A along with a DC Bus Nominal Voltage of DC 300V. | Available, Call For Quote |
| DKC02.3-016-7-FW | The DKC02.3-016-7-FW is an EcoDrive in the DKC Series. It has an input voltage capacity of 200 to 230 AC. | Available, Call For Quote |
| DKC02.3-018-3-MGP-01VRS | The DKC02.3-018-3-MGP-01VRS is a Drive Controller with SERCOS Interface in the DKC Series. It operates at a rated current of 18 Amps and a DC bus nominal voltage of 300 Volts. | Available, Call For Quote |
| DKC02.3-040-7-FW | The DKC02.3-040-7-FW is a Digital Drive Controller in the DKC Series. It uses a command communication interface of SERCOS and has a rated current of 40 A. | Available, Call For Quote |
| DKC02.3-100-7-FW | The DKC02.3-100-7-FW is a Drive Controller in the DKC Series. It uses a 100A current type and is compatible with single phase AC and three phase AC supplies ranging from 200V to 480V. | Available, Call For Quote |
| DKC02.3-200-7-FW | The DKC02.3-200-7-FW is a Drive Controller in the DKC Series. It features a modular design allowing for simplified troubleshooting. | Available, Call For Quote |
| DKC02.3-LK-SCK02 | The DKC02.3-LK-SCK02 is an Ecodrive in the DKC Series. It communicates through a SERCOS interface and utilizes fiber optic cables for its connections. | Available, Call For Quote |
| DKC03.1-040-7-FW | The DKC03.1-040-7-FW is a Drive Controller in the DKC Series. It has a modular design and operates with a rated input voltage of 380V-480V. | Available, Call For Quote |
| DKC03.2-100-7-FW | The DKC03.2-100-7-FW is an AC Servo Drive in the DKC Series. It operates at a voltage rating of 700V DC. | Available, Call For Quote |
| DKC03.3-016-7-FW | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller in the DKC Series. This Drive features a Rated Current of 16A along with a DC Bus Nominal Voltage of DC 700V. | Available, Call For Quote |
| DKC03.3-040-7-FW | The DKC03.3-040-7-FW is a Drive Controller in the DKC Series. It operates with a rated input voltage of 200V to 480V. | Available, Call For Quote |
| DKC03.3-100-7-FW | The DKC03.3-100-7-FW is a Drive Controller in the DKC Series. It operates with a type current of 100A and a rated input voltage range of 200V - 480V. | Available, Call For Quote |
| DKC03.3-200-7-FW | The DKC03.3-200-7-FW is a Drive Controller in the DKC Series. It operates on a rated input voltage of 200V-480V. | Available, Call For Quote |
| DKC03.3-LK-PBK02 | The DKC03.3-LK-PBK02 is a drive controller in the DKC Series. It uses the Profibus-DP protocol and can be combined with various Indramat Motors. | Available, Call For Quote |
| DKC04.3-016-7-FW | The DKC04.3-016-7-FW is an Intelligent Drive Control System in the DKC Series. It operates at a voltage class of 7 and can function within an ambient temperature range of 0 ?C to 40 ?C. | Available, Call For Quote |
| DKC04.3-040-7-FW | The DKC04.3-040-7-FW is a DKC Drive Controller in the DKC Series. It has control capabilities for current, position, and velocity. | Available, Call For Quote |
| DKC04.3-100-7-FW | The DKC04.3-100-7-FW is a Drive Controller in the DKC Series. It operates at a current of 100 A. | Available, Call For Quote |
| DKC04.3-200-7-FW | The DKC04.3-200-7-FW is a Drive Controller in the DKC Series. It operates with a type current of 200 A. | Available, Call For Quote |
| DKC04.3-200-7-FW-S101 | The DKC04.3-200-7-FW-S101 is an AC Servo Amplifier in the DKC Series. It accurately measures rotor position via its digital, intelligent drive functionality. | Available, Call For Quote |
| DKC04.3-LK-ITB01 | The DKC04.3-LK-ITB01 is a Drive Controller Option Card in the DKC Series. It features an InterBus interface for effective communication protocols. | Available, Call For Quote |
| DKC05.3-040-7-FW | The DKC05.3-040-7-FW is a Drive Control System in the DKC Series. It operates at a voltage of 700 V. | Available, Call For Quote |
| DKC05.3-200-7-FW | The DKC05.3-200-7-FW is a Drive Controller in the DKC Series. It operates within a temperature range of 0 ?C to 40 ?C. | Available, Call For Quote |
| DKC05.3-LK-CAN01 | The DKC05.3-LK-CAN01 is a Drive Controller in the DKC Series. It uses a CANopen Interface communication protocol for facilitating industrial motion systems. | Available, Call For Quote |
| DKC06.3-016-7-FW | The DKC06.3-016-7-FW is a Servo Drive System in the DKC Series. It supports multi-axis motion and can connect to either single or 3-phase AC voltage. | Available, Call For Quote |
| DKC06.3-040-7-FW | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller in the DKC Series. This Drive features a Rated Current of 40A along with a DC Bus Nominal Voltage of DC 700V. | Available, Call For Quote |
| DKC06.3-100-7-FW | The DKC06.3-100-7-FW is a Drive Controller in the DKC Series. It operates at a temperature range of 5 - 45 degrees Celsius, with a maximum operating temperature of 55 degrees Celsius with output drop. | Available, Call For Quote |
| DKC06.3-200-7-FW | The DKC06.3-200-7-FW is a Drive Controller in the DKC Series. It offers a protection level of IP20 for dust protection. | Available, Call For Quote |
| DKC06.3-LK-DVN01 | The DKC06.3-LK-DVN01 is a Drive Controller in the DKC Series. It offers a modular control solution for industrial setups. | Available, Call For Quote |
| DKC10.3-004-3-MGP-01VRS | The DKC10.3-004-3-MGP-01VRS is a Servo Drive Controller in the DKC Series. It has a maximum power output of 39.8 watts. | Available, Call For Quote |
| DKC10.3-008-3-MGP-01VRS | The DKC10.3-008-3-MGP-01VRS is a Servo Drive Controller in the DKC Series. It has a current rating of 8A, suitable for use with 200W motors. | Available, Call For Quote |
| DKC10.3-012-3-MGP-01VRS | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller in the DKC Series. This Drive features a Rated Current of 12A along with a DC Bus Nominal Voltage of DC 300V. | Available, Call For Quote |
| DKC10.3-018-3-MGP-01VRS | The DKC10.3-018-3-MGP-01VRS is a Servo Drive Controller in the DKC Series. It has a nominal DC voltage rating of 300V. | Available, Call For Quote |
| DKC11.1-040-7-FW | The DKC11.1-040-7-FW is a Drive Controller in the DKC Series. It operates at a rated intermediate circuit voltage of 700V and a current rating of 40A. | Available, Call For Quote |
| DKC11.3-040-7-FW | The DKC11.3-040-7-FW is a Servo Drive Controller in the DKC Series. It has a nominal DC bus voltage of 700V. | Available, Call For Quote |
| DKC11.3-100-7-FW | The DKC11.3-100-7-FW is a Servo Drive in the DKC Series. It operates with an input AC Voltage of 200V – 480V. | Available, Call For Quote |
| DKC11.3-200-7-FW | The DKC11.3-200-7-FW is a Drive Controller in the DKC Series. It has a maximum rated current capacity of 200A and can connect to single phase or three-phase AC input with a voltage range of 200v to 480v. | Available, Call For Quote |
| DKC21.3-016-7-FW | The DKC21.3-016-7-FW is a servomotor controller in the DKC Series. It has a peak current output of 16A. | Available, Call For Quote |
| DKC21.3-040-7-FW | The DKC21.3-040-7-FW is a Servo-Drive Controller in the DKC Series. It operates on a voltage between 200 – 480 VAC. | Available, Call For Quote |
| DKC21.3-100-7-FW | The DKC21.3-100-7-FW is a Drive Controller in the DKC Series. It operates within a voltage requirement range of 200V to 480V AC. | Available, Call For Quote |
| DKC21.3-200-7-FW | The DKC21.3-200-7-FW is a Servo Drive Controller in the DKC Series. It has a mains connection input voltage range of 200v to 480v AC. | Available, Call For Quote |
| DKC22.3-016-7-FW | The DKC22.3-016-7-FW is a DKC Drive in the DKC Series. It has a maximum current rating of 16A and requires a separately ordered firmware module. | Available, Call For Quote |
| DKC22.3-040-7-FW | The DKC22.3-040-7-FW is a Servo Drive in the DKC Series. It functions with a type-current of 40A and has switchable frequency capabilities, allowing 16A at 4kHz and 12.5A at 8kHz. | Available, Call For Quote |
| DKC22.3-100-7-FW | The DKC22.3-100-7-FW is a Servo Drive Controller in the DKC Series. It has a peak current rating of 100A and switchable frequency options of 4kHz or 8kHz. | Available, Call For Quote |
| DKC22.3-200-7-FW | The DKC22.3-200-7-FW is a Servo-Drive Controller in the DKC Series. It has a connectivity feature of SERCOS Interface II and an additional interface of RS232/RS485 and Analog. | Available, Call For Quote |
| FWA-ECODR3-CRP-01VRS-MS | The FWA-ECODR3-CRP-01VRS-MS is a Firmware Unit in the DKC Series. It can shut down due to over temperature. | Available, Call For Quote |
| FWA-ECODR3-CRP-02VRS-MS | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller Firmware Module Tool in the DKC Series. | Available, Call For Quote |
| FWA-ECODR3-ELC-01VRS-MS | The FWA-ECODR3-ELC-01VRS-MS is a Firmware Unit in the DKC Series. It has a maximum Velocity Parameter of A106. | Available, Call For Quote |
| FWA-ECODR3-FGP-02VRS-MS | The FWA-ECODR3-FGP-02VRS-MS is a motion control firmware in the ECODR3 Series. It uses a fieldbus interface for connection. | Available, Call For Quote |
| FWA-ECODR3-FGP-03VRS-MS | The FWA-ECODR3-FGP-03VRS-MS is a firmware in the ECODR3 Series. It features an updated standard type fieldbus interface at the time of release. | Available, Call For Quote |
| FWA-ECODR3-FLP-04VRS-MS | The FWA-ECODR3-FLP-04VRS-MS is a Firmware in the DKC Series. It is a version 4 release of the Field Bus Interface firmware, which was updated at the time of release. | Available, Call For Quote |
| FWA-ECODR3-SGP-01VRS-MS | The FWA-ECODR3-SGP-01VRS-MS is a firmware in the DKC Series. It is a standard version used for ECODRIVE03 series of controllers and supports multiple languages. | Available, Call For Quote |
| FWA-ECODR3-SGP-03VRS-MS | The FWA-ECODR3-SGP-03VRS-MS is a Firmware in the DKC Series. It features a communication interface that includes Parallel, Analogue, and SERCOS options. | Available, Call For Quote |
| FWA-ECODR3-SMT-01VRS-MS | The FWA-ECODR3-SMT-01VRS-MS is an Industrial Firmware in the DKC Series. It facilitates machine tooling operations with a communication interface that includes Parallel, Analogue, and SERCOS. | Available, Call For Quote |
| FWA-ECODR3-SMT-02VRS-MS | The FWA-ECODR3-SMT-02VRS-MS is a Servo Drive Firmware in the DKC Series. It boasts communication interfaces such as SERCOS, Analogue, and Parallel for diverse connectivity options. | Available, Call For Quote |
| FWA-ECODRV-ASE-02VRS-MS | The FWA-ECODRV-ASE-02VRS-MS is a firmware in the DKC Series. It comes loaded with the second version of a multilingual standard application software for parallel interface communication. | Available, Call For Quote |
| FWA-ECODRV-ASE-04VRS-MS | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller Firmware Module Tool in the DKC Series. | Available, Call For Quote |
| SUP-M01-DKCXX.3-016 | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller Mounting Screws in the DKC Series. | Available, Call For Quote |
| SUP-M01-DKCXX.3-040 | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller Mounting Screws in the DKC Series. | Available, Call For Quote |
| SUP-M01-DKCXX.3-100 | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller Mounting Screws in the DKC Series. | Available, Call For Quote |
| SUP-M01-DKCXX.3-200-7 | Rexroth, Indramat, Bosch AC Servo Amplifier Drive Controller Mounting Screws in the DKC Series. | Available, Call For Quote |
| SUP-M02-DKCXX.3 | The SUP-M02-DKCXX.3 is a Replacement Screw Kit in the DKC Series. It utilizes ECODRIVE technology and is primarily used in the automation industry. | Available, Call For Quote |