Vickers
EEA-AMP-451-A-10
The EEA-AMP-451-A-10 is a series of automation cards by Vickers, known for their single input/output circuit, ability to be configured multiple ways, and built-in milli amp rectifier. Notably lightweight at 1.4 kg, these cards are versatile for most automation hydraulic environments, featuring 3 inverters and powered by a 15V supply.
EEA-LIM-454-A-10
The EEA-LIM-454-A-10 is a series of fluid amplifier cards by Vickers, featuring two voltage followers, a comprehensive LED front panel, and easy access test points. They come equipped with two limit comparator devices, functional as both inverters and non-inverters, and operate on a low-risk, 24V relay and logic supply voltage.
EEA-PAM-126-C-30
The EEA-PAM-126-C-30 is a series of proportional valve controllers by Vickers, designed specifically for automation applications in fluid power control. These units, equipped with ramp generators, LED-lit CNC metal faceplates, enhance fluid flow control and provide clear operation status or error indications.
EEA-PAM-5**-A-12
The EEA-PAM-5**-A-12 is a series of amplifier cards by Vickers, designed for use in fluid control systems due to their high level of flow control and precision. Key features of this series include varied input voltages, an integrated function generator ramp, power overload protection, and configurable slots for plug-in modules, thereby granting users complete control over fluid flow.
EEA-PAM-5**-A-14
The EEA-PAM-5**-A-14 is a series of power amplifier cards by Vickers, designed for proportional hydraulic valve control. Featuring a widened supply voltage range, low supply voltage safety protection, unaffected ramping by gain adjustment and strategically placed monitoring points, these cards also offer a dead-band compensation on the front panel.
EEA-PAM-5**-A-30
The EEA-PAM-5**-A-30 is a series of proportional valve cards by Vickers, used in hydraulic systems to regulate fluid flow. These valves, notable for their innovation yet reliability, work by controlling the electric current to the solenoids to adjust the hydraulic actuator's working load.
EEA-PAM-5**-A-32
The EEA-PAM-5**-A-32 is a series of proportional control valve units by Vickers designed for the regulation and measurement in hydraulic systems. These units feature 5 voltage inputs, an inverter, a current input range of 0 to 20 milliamps, LED indicators at each monitor point, and come equipped with overload protection for power surges.
EEA-PAM-5**-B-32
The EEA-PAM-5**-B-32 is a series of power amplifier cards by Vickers, recognized for their full command logic, 2 ramps, and a four input demand signal module. Besides carrying features of the A-32 series, they also accommodate 24V command signal and 24V logic signal, and use clear LED light signals for easy readings.
EEA-PAM-5**-C-32
The EEA-PAM-5**-C-32 is a series of amplifier proportional control valve cards by Vickers, equipped with integral logic command modules that read acceleration and deceleration rates for individual movement directions. These USA-made products offer a range of specific function cards, feature 4 adjustable ramp time settings, command pre-set settings, and incorporate 4-quadrant acceleration and deceleration.
EEA-PAM-5**-D-32
The EEA-PAM-5**-D-32 is an advanced amplifier card by Vickers that integrates a PID module, enabling single D-32 card to replace two conventional amplifier cards. This product outshines others in its category with features such as ramp command inputs, feed-forward option, closed loop operation for acceleration and deceleration, pre-installed test functionality, a DIL switch with potentiometer, and a feedback feature for an analog sensor interface.
EEA-PAM-533-E-30
The EEA-PAM-533-E-30 is a replacement amplifier card by Vickers that enables electronic signal control of Eaton proportional valves and offers overload protection against electric power surges. This efficient and reliable product features pulse modulation, ramp function generators, low power voltage, deadband zeroing for easy tuning, and can accommodate plug-in modules for special commands or functions.
EEA-PAM-535-A-20
The EEA-PAM-535-A-20 is a control card series by Vickers, designed specifically for regulating proportional valves in fluid control settings. Equipped with four potentiometers, LED indicators for efficient monitoring, and easy installation and maintenance features, these amplifier cards offer error-free operation for quality automation parts.
EEA-PAM-561-C-31
The EEA-PAM-561-C-31 is a hydraulic automation control system by Vickers, designed to meet high global standards. It features bright LED lights, contact interface points, a precision machined front panel, and provides options for convenient external wiring.